References

Application : Three Umlauf-Bridles in a PPP-Line. UB 1 and UB2 provide tension for scalebreaking and leveling in the entrance of the PPP-Line UB3 provides back tension for recoiling and guides the strip to the recoiler. Technical Data: Material: steel Tension: 1260 kN Thickness: 1,4 – 13,0 mm Width: 600 – 1.890 mm Speed: 154 m/min max.

Application: Annealing and pickling line The Umlauf Bridle builds up the back-tension ahead of the recoiler and controls the centerline position of the strip upstream of a side trimming unit. Technical data: Material: stainless steel Strip tension: 380 kN Strip thickness: 3 – 14 mm Strip width: 1,000 – 2,600 mm Line speed: 30 m/min max.

Application: Slitting line The Umlauf Bridle guides the strip into the slitting unit. Technical data: Material: strip steel Strip tension: 40 kN Strip thickness: 0.6 – 4 mm Strip width: 100 – 150 mm Line speed: 250 m/min max.

Application: Push-Pull pickling line The Umlauf Bridle creates the back-tension ahead of the recoiler and contols the centerline position of the strip. Technical data: Material: stainless steel strip Strip tension: 100 kN Strip thickness: 0.8 – 14 mm Strip width: 100 – 450 mm Line speed: 150 m/min max.

Application: Braking unit in the exit section of a processing line ahead of the reccoiler The Umlauf Bridle builds up the strip back-tension downstream of processing units and controls the centerline position of the strip. Technical data: Material: steel Strip tension: 400 kN max. Strip thickness: 2.0 – 12.0 mm Strip width: 500 mm Line speed: 50 m/min max. Technical data: Material: steel strip Strip tension: 50 kN Strip thickness: 2.0 – 6.0 mm Strip width: 100 – 300 mm Line speed: 20 m/min max.

Application: Braking unit ahead of the recoiler in a coating line Technical data: Material: aluminum strip Strip tension: 40 kN Strip thickness: 0.6 – 3.0 mm Strip width: 100 – 600 mm Line speed: 50 m/min max.

Application: Braking unit between spiral pickling tank and recoiler Technical data Material: hot strip Strip tension: 100 kN Strip thickness: 3,0 – 8,0 mm Strip width: 100 – 450 mm Line speed: 50 m/min max. Applications 2 + 3 : Braking unit in a recoiling plant ahead of the upcoiler Technical data Material: Cold strip Strip tension: 50 kN Strip thickness: 4.0 – 8.0 mm Strip width: 50 – 450 mm Line speed: 250 m/min max.

Application: Strip pulling unit downstream of an annealing furnace Technical data Material: electric strip Strip tension: 0.02 – 1.0 kN Strip thickness: 0.05 – 0.5 mm Strip width: 100 – 600 mm Line speed: 30 m/min max. Application: Speedmaster of the annealing line. Strip tension measurement and control. Centerline control of the strip. Application 2 : Braking unit ahead of recoiler Technical data Material: Elektric strip Strip tension: 5.0 kN Strip thickness: 0.05 – 0.5 mm Strip width: 100 – 600 mm Line speed: 100 m/min max.

Application: In the exit section of a push-pull pickling line ahead of the side trimming unit and the recoiler The Umlauf Bridle creates the back-tension ahead of the recoiler and controls the centreline position of the strip upstream of a side trimming unit. Technical data: Material: Steel and stainless stell strip Strip tension: 180 kN Strip thickness: 2.0 – 12.7 mm Strip width: 610 – 1,550 mm Line speed: 100 m/min max.

Application 1 : Three Umlauf Bridles in a processing line Technical data: Material: stainless steel strip Strip tension: 1200 kN Strip thickness: 0.5 – 3.0 mm Strip width: 600 – 2,100 mm Line speed: 120 m/min max. Application 2: Two Umlauf Bridles as braking units in an annealing line Technical data of Umlauf-Bridle no. 1: Material: stainless steel strip Strip tension: 200 kN Strip thickness: 0.6 – 3.0 mm Strip width: 200 – 700 mm Line speed: 30 m/min max. Technical data of Umlauf-Bridle no. 2: Material: stainless steel strip Strip tension: 200 kN Strip thickness: 0.6 – 3.0 mm Strip width: 200 – 1,500 mm Line speed: 30 m/min max.

Application: Braking unit for slit strip The Umlauf Bridle builds up the back-tension of slit strip ahead of the recoiler Technical data: Material: Electric strip Strip tension: 30 kN Strip thickness: 0.5 – 2.0 mm Strip width: 20 – 1,250 mm Line speed: 300 m/min max.

Application: Hot-dip galvanized strip The Umlauf Bridle builds up back-tension ahead of the recoiler and controls the centerline position of the strip. Technical data: Material: Hot-dip galvanized strip Strip tension: 60 kN Strip thickness: 0.8 – 5.0 mm Strip width: 50 – 550 mm Line speed: 280 m/min max.